A redstone circuit is a structure that can be built to activate or control mechanisms.
Circuits can be designed to act in response to player activation, or to operate autonomously -- either on a loop, or in response to non-player activity such as mob movement, item drops, plant growth, etc. The mechanisms that can be controlled by redstone circuits range from simple devices such as automatic doors and light switches, to complex devices such as elevators, automatic farms, or even in-game computers. Understanding how to build and use redstone circuits and the mechanisms they can control will greatly increase the range of things that can be accomplished in Minecraft.
The subject of redstone structures is huge — this article provides only an overview of the many different types of redstone circuits which can be built. For full details and examples of these redstone circuits, see the main articles for each topic.
 Redstone basics
Before describing the blocks used to build redstone circuits, or the types of circuits which can be built, an understanding of some basic concepts is required.
- Redstone components
- Main article: Redstone components
- A redstone component is a block that provides some purpose to a redstone circuit.
- A power component provides power to all or part of a circuit -- e.g., redstone torch, button, lever, etc.
- A transmission component passes power from one part of the circuit to another -- e.g., redstone wire, redstone repeater, redstone comparator.
- A mechanism component affects the environment (by moving, producing light, etc.) -- e.g., piston, redstone lamp, dispenser, etc.
- Some blocks may be powered or unpowered. Think of a "powered block" as a block that is electrified (but safe to touch). Some blocks will show their powered state visibly (for example, redstone wire lights up, a piston extends, etc.), but other blocks may give no visual indication of their powered state other than their effect on other redstone components.
- Opaque blocks can be strongly-powered or weakly-powered (a different concept than power level, see below). The only difference is that a weakly-powered block will not power adjacent redstone wire.
- The basic rules for transmission are as follows: Any power component will strongly power a block, as will a repeater or comparator. Wire will weakly power a block, but if the block is also strongly powered, that takes precedence. A strongly powered block, but not a weak one, will power adjacent wire. However, no solid block can directly power another solid block -- there must be wire or a device in between. Also, a transparent block can't be powered by anything. "Strong" vs. "weak" power applies only to solid blocks, not to wire or devices.
- Power level
- Power level can vary from 0 to 15. Most power components provide power level 15, but redstone comparators and daylight sensors provide a variable amount of power.
- Redstone wire transmits power to adjacent redstone wire, but its strength decreases by 1 for each block traveled. Redstone wire can thus transmit power up to 15 blocks before needing to be maintained (with a redstone comparator) or re-strengthened with a repeater. Power level only fades with wire-to-wire transmission, not between wire and a device or block.
- Power level can also be adjusted directly with a redstone comparator in comparison or subtraction mode.
- Redstone update
- When a change occurs somewhere in a redstone circuit, it can produce other changes in surrounding blocks in what is called a redstone update (not to be confused with Minecraft 1.5, known as the "Redstone Update"). Each of these changes can then produce other changes in their surrounding blocks. The update will propagate following the redstone circuit rules within loaded chunks. A common source of confusion comes when attempting to send redstone signals long distances, and finding that the signal stops when it hits an unloaded chunk or that conversely, a sensing signal from an unloaded chunk never arrives.
- Redstone tick
- A redstone tick is the moment when Minecraft updates redstone components. Redstone updates occur 10 times per second, so a redstone tick occurs every 0.1 seconds. Redstone torches, redstone repeaters, and mechanism components require one or more ticks to change state, so it can take a number of ticks for a signal to propagate through a complicated circuit.
- Redstone ticks differ from "game ticks" (20 per second) and "block ticks" (block updates that occur at each game tick). When discussing redstone circuits, a "tick" is always a redstone tick, unless otherwise specified.
- Signals and pulses
- Circuits with a stable output are said to produce a signal -- an ON signal (also "high" or "1") if powered, or an OFF signal ("low", "0") if unpowered. When a signal changes from OFF to ON and then back again, that is described as a pulse (or ON pulse), while the opposite is described as an OFF pulse. ON pulses are far more common, and in casual discussion, "a signal" often refers to an ON pulse.
- Very short pulses (1 or 2 ticks) can cause problems for some components or circuits because they may fail to keep up with the rapidly changing states. For example, a redstone torch will not respond to an exterior 1-tick pulse.
- Circuit vs. mechanism
- These terms are sometimes used interchangeably to describe structures which incorporate redstone components, but a useful distinction can be made between the two:
- A circuit performs operations on signals (generating, modifying, combining, etc.).
- A mechanism manipulates the environment (moving blocks, opening doors, changing the light level, producing sound, etc.).
- All mechanisms will necessarily incorporate redstone components or circuits, but a circuit by itself doesn't have to have an effect on the environment (except possibly incidentally, such as a redstone repeater changing its light level when changing its power state, or a piston moving a block to fulfill a role within the circuit). Making this distinction allows us to talk about circuits without having to define a specific in-game purpose for them, allowing players to find their own reasons to use them.
- This article, and the other articles on redstone circuits, discuss only circuits which operate on signals. For articles about mechanisms, see the list of tutorials at the end of the article.
- The wiki describes circuit size (the volume of the rectangular solid it occupies) with the notation of shorter width × longer width × height, including support/floor blocks, but not including inputs/outputs.
- Another method used for describing circuit size in the Minecraft community is to ignore non-redstone blocks simply used for support. However, this method is unable to distinguish between "flat" and "1-high" circuits, as well as some other circuit differences.
- Sometimes it is convenient to compare circuits simply by the area of their footprint (e.g., 3×4 for a circuit three block wide by four blocks long), or by a single dimension important in a particular context (e.g., length in a sequence of sub-circuits, height in a confined space, etc.).
- A number of features may be considered desirable design goals:
- 1-High: A structure is 1-high (aka "1-tall") if its vertical dimension is one block high (which includes not requiring support blocks -- see size above).
- 1-Wide: A structure is 1-wide if at least one of its horizontal dimensions is only one block wide.
- Flat: A structure is flat if it generally can be laid out on the ground with no components above another. Flat structures are often easier for beginners to understand and build, and fit nicely under floors or on top of roofs.
- Flush: A structure is flush if it doesn't extend beyond a flat wall, floor, or ceiling and can still provide utility to the other side. Flush is a desirable design goal for piston-extenders, piston doors, etc. (see also seamless below).
- Instant: A structure is instant if its output responds immediately to its input (a circuit delay of 0 ticks).
- Seamless: A structure is seamless if it is hidden behind a flat wall, floor, or ceiling and can still provide utility to the other side. Seamless is a desirable design goal for piston-extenders, piston doors, etc. (see also flush above).
- Silent: A structure is silent if it makes no noise (such as from piston movement, dispenser/dropper triggering, etc.). Silent structures are desirable for traps, peaceful homes, and for reducing lag produced by sound.
- Tileable: To tile a structure means to repeat the structure in one or more dimensions (like the way tiles on a floor repeat in multiple directions). All structures are repeatable, given enough space, so a useful definition of "tileable" is that a structure can be placed directly next to another copy of itself without interference. Structures might be described as "2-wide tileable" (tileable every two spaces in one dimension), or "2×4 tileable" (tileable in two directions), etc. Some structures might be described as "alternating tileable", meaning they can be placed next to each other if every other one is flipped or a slightly different design.
- Other design goals may include reducing the delay a sub-circuit adds to a larger circuit, reducing the use of resource-expensive components (redstone, nether quartz, etc.), and re-arranging or redesigning a circuit to make it as small as possible.
 Circuit types
Although the number of ways to construct circuits is endless, certain patterns of construction occur over and over again. The following sections attempt to categorize the circuits which have proven useful to the Minecraft community, while the main articles describe the specific circuits which fall into those categories.
Some of these circuits might be used by themselves for simple control of mechanisms, but frequently you will need to combine them into more complex circuits to meet the needs of a mechanism.
 Transmission circuit
- Main article: Transmission circuit
Some aspects of signal transmission can be helpful to understand: transmission types, vertical transmission, repeaters, and diodes.
- Digital: A simple on/off transmission.
- Analog: A transmission which outputs the same signal strength as the input.
- Binary: Multiple digital lines where each line represents a single digit in a binary number.
- Unary: Multiple digital lines which represent a number by which line is powered.
- Although horizontal signal transmission is pretty straight-forward, vertical transmission involves options and trade-offs.
- Redstone staircases: The simplest way to transmit signals vertically is by placing redstone wire on blocks diagonally upwards, either in a straight staircase of blocks, in a 2×2 spiral of blocks, or in another similar variation. Redstone staircases can transmit signals both upwards and downwards, but can take up a lot of space and will require repeaters every 15 blocks.
- Redstone ladders: Because glowstone, upside-down slabs and upside-down stairs can support redstone wire but don't cut redstone wire, signals can be transmitted vertically (upwards only) by alternating these blocks in a 2×1 "ladder". Redstone ladders take up less space than redstone staircases, but also require repeaters every 15 blocks.
- Torch towers and torch ladders: A redstone torch can power a block above it, or redstone wire beneath it, allowing vertical transmission both upwards or downwards (different designs are required for each). Because it takes each torch a little time to change state, a torch tower can introduce some delay into a circuit, but no repeaters are necessary.
- Other forms of vertical transmission are possible, using pistons, water, etc.
- To "repeat" a signal means to boost it back up to full strength. The easiest way to do this is with a redstone repeater, but some circuits may require repeater circuits such as "instant repeaters" that repeat a signal without the delay introduced by a redstone repeater, or "two-way repeaters" which can repeat a signal in either direction.
- A "diode" is a one-way circuit that allows a signal to travel only in one direction. It is used to protect another circuit from the chance of a signal trying to enter through the output, which could incorrectly change the circuit's state or interfere with its timing. It is also used in a compact circuit to keep one part of the circuit from interfering with another. Common choices for a diode include a redstone repeater or a height elevation to glowstone or an upside-down slab which won't transmit a signal back downwards.
- Many circuits are already one-way simply because their output comes from a block which can't take input. For example, you can't push a signal back into a circuit through a redstone torch except through the block it's attached to.
 Logic circuit
- Main article: Logic circuit
It's sometimes necessary to check signals against each other and only output a signal when the inputs meet some criteria. A circuit which performs this function is known as a logic gate (a "gate" that only allows signals through if the "logic" is satisfied). Although there are many different possible "logics" that could be checked, the two most common ones are the OR Gate and the AND Gate (possibly with inputs or outputs inverted).
- OR Gate
- An OR Gate produces an ON output if any of its inputs is ON.
- AND Gate
- An AND Gate produces an ON output only if all of its inputs are ON.
Inverting a signal (such as with a redstone torch) is also considered a logical operation (a NOT gate, because it produces output only when there is NOT input).
- See also: Tutorials/Basic Logic Gates
 Pulse circuit
- Main article: Pulse circuit
Some circuits require specific pulses, other circuits use pulse duration as a way to convey information. Pulse circuits manage these requirements.
A circuit which is stable in one output state and unstable in the other is known as a monostable circuit. Many pulse circuits are monostable because their OFF state is stable, but their ON state will quickly revert back to OFF.
- Pulse Generator
- A pulse generator produces a pulse of a specific duration.
- Pulse Limiter
- A pulse limiter (a.k.a. pulse shortener) reduces the duration of pulses which are too long.
- Pulse Extender
- A pulse extender (a.k.a. pulse sustainer, pulse lengthener) increases the duration of pulses which are too short.
- Pulse Delay
- A pulse delay circuit delays a pulse by a specific duration. Pulse delay circuits can be designed to only delay the rising edge of a pulse ("positive delay"), only the falling edge ("negative delay"), or both.
- Edge Detector
- An edge detector reacts to either a signal changing from OFF to ON (a "rising edge" detector) or from ON to OFF (a "falling edge" detector), or both (a "dual edge" detector).
- Pulse Duration Tester
- A pulse duration tester reacts only to pulses in a certain range of durations (often only to pulses of one specific duration).
- An oscilloscope is a sequence of redstone repeaters all set to a 1-tick delay. By seeing how many repeaters light up, you can observe the duration of a pulse. By running multiple oscilloscopes in parallel, you can compare the duration and delay of pulses produced by different circuits.
 Clock circuit
- Main article: Clock circuit
A clock circuit is a pulse generator that produces a loop of specific pulses over and over again. Some are designed to run forever, while others can be stopped and started.
A simple clock with only two states of equal duration is named for the duration of its ON state (e.g., for example, a clock which alternates between a 5-tick ON state and a 5-tick OFF state is called a 5-clock) while others are usually named for their period (the time it takes for the clock to return to its original state; for example, a "1-minute clock" might produce a 1-tick pulse every 60 seconds).
- Repeater clocks
- A repeater clock consists of a loop of repeaters (usually either redstone repeaters or redstone torches) with occasional wire or blocks to draw off the appropriate pulses.
- Piston clocks
- A piston clock produces a loop of pulses by passing a block back and forth (or around, with many pistons) and drawing off a pulse when the block is in a certain location.
- Minecart clocks
- When a minecart rolls over a detector rail, it gives off a signal. Setting up a circular or back-and-forth track can produce fairly precise clocks.
- Hopper clocks
- A hopper clock produces timed pulses by moving items around between hoppers and drawing signals off with redstone comparators.
Clocks can also be built based on boats, water flow, items waiting to despawn, etc.
 Memory circuit
- Main article: Memory circuit
Unlike a logic circuit whose state always reflects its current inputs, a memory circuit's output depends not on the current state of its inputs, but on the history of its inputs. This allows a memory circuit to "remember" what state it should be in, until told to remember something else. There are four basic types of memory circuits. (A few circuits combine two different types.)
- RS Latch
- An RS latch has two inputs, one to set the output on and another to reset the output back to off. An RS latch built from NOR gates is known as an "RS NOR Latch", which is the oldest and most common memory circuit in Minecraft.
- T Flip-Flop
- A T flip-flop is used to toggle a signal (like a lever). It has one input which toggles the output between on and off.
- D Flip-Flop
- A D flip-flop has a "data" input and a "clock" input. When the clock input turns on, it sets the output to equal its data input.
- JK Latch
- A JK latch has two inputs, one to set the output on and another to reset the output back to off (like an RS latch), but when both turn on simultaneously it toggles the output between on and off (like a T flip-flop).
- Unlike T Flip-Flops and RS Latches which can only hold two states (ON or OFF), a counter can be designed to hold a greater number of states.
Many other memory circuits are possible.
 Miscellaneous circuits
- Main article: Miscellaneous circuits
These circuits aren't generally needed for your typical project, but might find use in complex projects, proofs of concept, and thought experiments. Some examples:
- Multiplexers and Relays
- A multiplexer is an advanced form of logic gate which chooses which of two inputs to let through as output based on an additional input (for example, if input A is ON then output input B, otherwise output input C). The reverse of this is a relay, which copies a data input to one of two outputs, depending on whether the additional input is ON or OFF.
- A randomizer produces output signals unpredictably. Randomizers can be designed to produce a pulse at random intervals, or to randomize which of multiple outputs are turned ON (such as random number generators, or RNGs). Some randomizers use the random nature of Minecraft (such as cactus growth or dispenser slot selection), while others produce pseudo-randomness algorithmically.
- Multi-bit circuits
- Multi-bit circuits treat their input lines as a single multi-bit value (something other than zero and one) and perform an operation on them all at once. With such circuits, possibly combined with arrays of memory circuits, it's possible to build calculators, digital clocks, and even basic computers inside Minecraft.
- Block Update Detectors
- A block update detector (BUD, or BUD Switch) is a circuit which "reacts" to a block changing its state (for example, stone being mined, water changing to ice, a pumpkin growing next to a pumpkin stem, etc.). BUDs react by producing a pulse, while T-BUDs (Toggleable BUDs) react by toggling their output state. These are generally based on subtle quirks or glitches in device behavior; current circuits most often depend on pistons.
- See also: Tutorials/Block update detector
Many other complex circuits are possible.
- See also: Tutorials/Advanced redstone circuits
 Building circuits
The first step in building a redstone circuit is to decide what it will do.
- How and where will it be controlled?
- Will the circuit be controlled by the player, by mob movement, or something else?
- What mechanism components will it control?
- How will the signal be transmitted from the controls to the mechanisms?
- Will signals need to be combined from multiple sources?
It can be helpful to choose a specific set of blocks you use to construct circuits. Then, when you run into these blocks when digging out new rooms in your base, you know you're about to damage a previously-built circuit. Common choices include stone brick, snow block, and wool. (Using different colors of wool is also a great way to keep track of different circuits)
Be careful when building circuits to activate TNT (traps, cannons, etc.). Circuits in mid-construction can sometimes briefly power up unexpectedly, which might activate TNT. For example, if you place a redstone torch on a powered block, it won't "figure out" that it should be turned off until the next tick, and can briefly power another part of the circuit until then. Placing your TNT after the rest of the circuit is complete will help to avoid such problems and the destruction of the device itself.
When your circuit isn't working the way you think it should, take a look at it and try to find the problem.
- Are you trying to draw power from a weakly-powered block? Maybe you need a redstone repeater to strongly-power the block, or to pull power out of the block.
- Are you trying to transmit power through a non-opaque block? Replace it with an opaque block, or go around it.
- Did you create a short-circuit and a redstone torch that should be powered is now burned out? Fix the short-circuit and update the torch to get things going again.
- Are parts of your circuit activating when they shouldn't be? Maybe you've accidentally "crossed wires" allowing a signal from one part of the circuit to activate another part of the circuit.
- Did the behavior you were using get removed?
- Are pistons, dispensers, or droppers being indirectly powered?
Once your circuit is working, consider if it can be improved (without breaking it).
- Can you make the circuit faster?
- Reducing the number of components a signal has to travel through can speed up the circuit.
- Can you make the circuit smaller?
- Can you use fewer blocks?
- Can you shorten the redstone wire lines?
- Can you make the circuit more robust?
- Will the circuit still work when activated by a very short pulse?
- Will the circuit still work when activated and deactivated rapidly in succession?
- Did an update create the opportunity for a better circuit? (e.g. pistons, locking repeaters, etc.)
- Can you make it quieter?